Stock Firmware

Invens City X1 Firmware Flash File [Frp Bypass]

Invens City X1 Firmware



If you’re looking for the Invens City X1 Firmware you need to flash, it can sometimes be difficult to locate online. For Invens City X1.

In this Tutorial about Unbrick Invens City X1. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Invens City X1 Mediatek Based Devices.

Invens City X1 Firmware Flash File [Frp Bypass]:

All you have to do is simply download the below-given Invens City X1 firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Invens City X1 using SP Flash Tool. Yes, this guide is also helpful to recover unroot.

Or fix any software malfunctioning problem. To install the Stock firmware on Invens City X1 Mediatek powered device. You need software known as SP Flash Tool. Also called Smartphone Flash tool Download the Invens City X1 Stock Firmware. Drivers and SP flash tools then you can follow our guide to install the firmware on Invens City X1.

The Benefit Of Invens City X1 Firmware:

  • Flash Stock To Unbrick your Invens City X1
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.
  • Remove and Bypass Frp Lock and Google Account

Invens City X1 Firmware Details:

  • Gapps File: Included
  • Device Supported: Invens City X1
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android 5.1 Lollipop
 Download   Invens City X1 Firmware MT6580
[quads id=2]

Pre-requirements to Install Invens City X1 Firmware:

  • Supported Phone: Invens City X1
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Invens City X1 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Invens City X1 Firmware :

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Invens City X1 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Invens City X1 Firmware Flash File [Frp Bypass]Follow Detailed Instruction Invens City X1 Firmware Flashing With Sp Flash Tool.

Bypass Frp Lock Invens City X1 Remove Gmail Account

If you perform a Factory Data Reset on Invens City X1, all settings come back to the factory default settings. Almost all files are removed, such as documents and downloaded applications. For those who have a Google Account set up on the Invens City X1, FRP is active.

This means that after the reset, you’ll be required to sign in to the Google Account using the login name and security password. For those who have many different Google Accounts set up on the Invens City X1, can sign in using any of the accounts.

If an unauthorized person attempts to reset the Invens City X1 by a different method, the Invens City X1 would still require log-in using the Google account information. This means in case your Invens City X1 is dropped or thieved, another person may not have the ability to reset it and use it.

Even if you reset your Invens City X1, but don’t remember your Google login name and/or password, the Invens City X1 device cannot be used. In that situation, you can do one of these:

If you know your Google login name but cannot remember the actual password, you can reset your password on the device, or at It can take up to 24 hours for a new password to sync with all registered devices. After 24 hours, you can try logging in to your Invens City X1 phone with the new password.

For those who have multiple Google Accounts, and you cannot remember which Google Account you set up on your Invens City X1, visit

Bypass Frp Lock Invens City X1 Remove Gmail Account:

In this guide, I’m going to be showing You how you can format a single partition of the Invens City X1 device by using the SP Flash tool. The goal of the article is, for example, Your Invens City X1 is FRP locked. All You need is to format FRP partition or possibly You need to perform a factory reset but If you’re can not boot into recovery mode for whatever reason.

All you have to is to format user data & cache partitions, that is for factory reset For the requirements of this tutorial, all you have to is SP Flash Tool, the Invens City X1 scatter file so you can get the values of the partitions(s) You need to format and Notepad++ to open the scatter file and get the values.

Requirements To Bypass Invens City X1 FRP Lock Remove Google Account:

[quads id=2]

Instructions to Install Firmware on Invens City X1:

Step 1. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Step 2. Select the scatter file for your device by clicking choose besides the scatter-loading file’s drop-down bar.

Step 3. In the windows that appear next, navigate to and select the scatter file.

Step 4. You should now be taken back to the SP flash tool window, click on the Format tab.

Step 5. Tick the checkbox beside “Manual format flash”.

Step 6. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++.

Step 7. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition].

Step 8. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Step 9. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

Step 10. Boot up the device.

Follow detail instruction on how to remove FRP lock and bypass Gmail account on Invens City X1 with sp flash tool.


Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!
Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker