Download Official Stock Intex IM0418ND Firmware Flash File For Intex Indie 15 IM0418ND. If you have Intex Indie 15 IM0418ND Smartphone.

And You want to download the Intex IM0418ND Stock ROM – Flash File For it. Then You are on the Correct Place, You have to do this by following the Below Guide.

Intex IM0418ND Firmware

The Intex Indie 15 mobile features a 5.2″ (13.21 cm) display with a screen resolution of HD (720 x 1280 pixels) and runs on Android v7.0 (Nougat) operating system. The device is powered byQuad-core, 1.3 GHz, Cortex A53 processor paired with 2 GB of RAM.

As far as the battery is concerned it has 2800 mAh. Over that, as far as the rear camera is concerned this mobile has a 13 MP camera. Other sensors include a Light sensor, Proximity sensor, Accelerometer. So, does it have a fingerprint sensor? Yes, it does.

For graphical performance that can make games run smoothly, this phone has got a Mali-T720 MP1 GPU. On board, storage is at 16 GB with the option to expand the memory by Yes Up to 128 GB. The design is one of the most important factors when it comes to mobiles.

This phone is 9 mm slim and weighs 168 grams.

Intex Indie 15 IM0418ND Firmware Flash File [Stock ROM]:

This article contains the Intex Indie 15 IM0418ND Firmware Flash File. That will allow you to recover your Intex Indie 15 IM0418ND mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

We will use Sp Flash Tool to unbrick the Intex Indie 15 IM0418ND as we use for Intex Lions 6. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Intex Indie 15 IM0418ND.


The Advantages Of Intex Indie 15 IM0418ND Stock ROM:

  • Flash Stock To Unbrick your Intex Indie 15 IM0418ND
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Intex Indie 15 IM0418ND ROM Details:

  • Gapps File: Included
  • Device Supported: Intex IM0418ND Indie 15
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MTK6737
  • Os: Android 7.0 Nougat


Indie+_15_MT6737_7.0 flash


Pre-requirements to Install Intex Indie 15 IM0418ND Firmware:

  • Supported Phone: Intex Indie 15 IM0418ND
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Intex im0418nd Backup:

Intex Indie 15 IM0418ND Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Intex Indie 15 IM0418ND Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Intex Indie 15 IM0418ND Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Intex Indie 15 IM0418ND Flash File.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

intex im0418nd flash file

Follow Detailed Instruction Intex Indie 15 IM0418ND Firmware Flashing With Sp Flash Tool.


Please enter your comment!
Please enter your name here