Intex Cloud String HD Android 5.1 Official Stock Firmware Flash Files

Intex Cloud String HD smartphone was launched in May 2016. The phone comes with a 5.00inch touchscreen display with a resolution of 720 pixels by 1280 pixels at a PPI of 294 pixels per inch.

The Intex Cloud String HD is powered by 1.3GHz quad-core Spreadtrum SC9832A processor and it comes with 1GB of RAM. The phone packs 8GB of internal storage that can be expanded up to 32GB via a microSD card. As far as the cameras are concerned, the Intex Cloud String HD packs a 8-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.

The Intex Cloud String HD runs Android 5.1 and is powered by a 2200mAh removable battery. It measures 144.50 x 72.50 x 8.70 (height x width x thickness) and weigh 150.00 grams.

The Intex Cloud String HD is a dual SIM (GSM and GSM) smartphone that accepts Micro-SIM and Micro-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM, 3G and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.

Intex Cloud String HD Android 5.1 Official Stock Firmware SP Flash Tool Files

Intex Cloud String HD Android 5.1 Official Stock Firmware Flash Files.

Please Read and understand the Full Guide before Performing Any Action.

Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.

This tutorial is only for Intex Cloud String HD. Please do not use it on any other options smartphone or tablet.

Make sure that the USB drivers for your device are installed on the computer.
Your smartphone must have a 70–80% charge.
Make a backup copy of important data such as call logsSMS, and other data, it is to if something goes wrong, your data is not affected.


You Can Use The Following Flash Files For Upgrade Intex Cloud String HD Android 5.1/ And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom IMEI Null or Unknown Baseband Problems Can Be Solved.


Download And Install Spreadtrum Drivers.

Download And Install SPD Download Tool R2.9.7.002.

How To Flash / Update Intex Cloud String HD Android 5.1 With SPD Upgrade Tool:-

Step 1. Open the Research download tool > bin folder.

Step 2. Launch ResearchDownload.exe.

Step 3. Click on the Load Packet icon (top left corner).

Step 4. In the window that pops up, navigate to the location of the .pac file, select it then click Open.

Step 5. The PAC file should now be loaded (its name should appear at the top).

Step 6. Click the Settings Icon (top left corner).

Step 7. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

17 Downloads | Source: | Version: Android 5.1
    Intex Cloud String HD , Intex Cloud String HD Flash Files, Intex Cloud String HD Flash Tool, Intex Cloud String HD Official Stock Firmware, Intex Cloud String HD Stock ROM Download

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2018 Aio Mobile Stuff
Please disabled adblocker to keep our website live.After Disabled Click Refresh button