Intex Cloud C1 SC9832 Android 7.0 Official Stock Firmware Flash Files

Intex Cloud C1 smartphone was launched in September 2017. The phone comes with a 4.00inch touchscreen display with a resolution of 480 pixels by 800 pixels at a PPI of 245 pixels per inch. Intex Cloud C1 price in India starts from Rs. 3,499.

The Intex Cloud C1 is powered by 1.3GHz quad-core Spreadtrum SC9832 processor and it comes with 1GB of RAM. The phone packs 8GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Intex Cloud C1 packs a 5megapixel primary camera on the rear and a 2megapixel front shooter for selfies.

The Intex Cloud C1 runs Android 7.0 and is powered by a 1750mAh non removable battery. It measures 125.00 x 64.00 x 11.20 (height x width x thickness) and weigh 119.50 grams.

The Intex Cloud C1 is a dual SIM (GSM and GSM) smartphone that accepts MicroSIM and Micro-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM, 3G and 4G (with support for Band 40 used by some LTE networks in India).

Intex Cloud C1 SC9832 Android 7.0 Official Stock Firmware Flash Files

Intex Cloud C1 SC9832 Android 7.0 Official Stock Firmware Flash Files.

Please Read and understand the Full Guide before Performing Any Action.

Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.

This tutorial is only for Intex Cloud C1 SC9832. Please do not use it on any other options smartphone or tablet.

Make sure that the USB drivers for your device are installed on the computer.
Your smartphone must have a 70–80% charge.
Make a backup copy of important data such as call logsSMS, and other data, it is to if something goes wrong, your data is not affected.


You Can Use The Following Flash Files For Upgrade Intex Cloud C1 SC9832 Android 7.0 / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom IMEI Null or Unknown Baseband Problems Can Be Solved.


Download And Install Spreadtrum Drivers.

Download And Install SPD Download Tool R2.9.7.002.

How To Flash / Update Intex Cloud C1 SC9832 Android 7.0 With SPD Upgrade Tool:-

Step 1. Open the Research download tool > bin folder.

Step 2. Launch ResearchDownload.exe.

Step 3. Click on the Load Packet icon (top left corner).

Step 4. In the window that pops up, navigate to the location of the .pac file, select it then click Open.

Step 5. The PAC file should now be loaded (its name should appear at the top).

Step 6. Click the Settings Icon (top left corner).

Step 7. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

55 Downloads | Source: firmwarefile| Version: Android 7.0
    Intex Cloud C1 SPd Flash Tool, Intex Cloud C1 Stock ROM Download, Intex Cloud C1 Usb Driver, Intex Cloud C1 Flash Files, Intex Cloud C1 Official Stock Firmware

Author: Gadgetmodder

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2018 Aio Mobile Stuff
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for