Home / How To / Intex Aqua 4.0 3G Official Stock Firmware Flash Files

Intex Aqua 4.0 3G Official Stock Firmware Flash Files

Intex Aqua 4.0 3G Official Stock Firmware Flash Files

The Intex Aqua 4.0 is powered by quad-core quad core processor and it comes with 512MB of RAM. The phone packs 4GB of internal storage that can be expanded up to 32GB. As far as the cameras are concerned, the Intex Aqua 4.0 packs a 2-megapixel primary camera on the rear and a 0.3-megapixel front shooter for selfies.

The Intex Aqua 4.0 runs Android 6.0 and is powered by a 1500mAh non removable battery. It measures 124.70 x 61.60 x 10.40 (height x width x thickness) and weigh 112.00 grams.

The Intex Aqua 4.0 is a dual SIMsmartphone that accepts Micro-SIM and Micro-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, Headphones, FM, 3G and 4G (with support for Band 40 used by some LTE networks in India).

Intex Aqua 4.0 3G Official Stock Firmware Flash Files.

Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.

This tutorial is only for Intex Aqua 4.0 3G.

Please do not use it on any other options smartphone or tablet.

Make sure that the USB drivers for your device are installed on the computer.
Your smartphone must have a 70-80% charge.

Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

You Can Use The Following Flash Files For Upgrade Intex Aqua 4.0 3G / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden DeathBricked /Not Power And Also After Flashing The Stock Rom IMEI Null or Unknown Baseband Problems Can Be Solved.

Download And Install Spreadtrum Drivers.

Download And Install SPD Download Tool R2.9.7.002.

How To Flash / Update Intex Aqua 4.0 3G With SPD Upgrade Tool:-

Step 1. Open the Research download tool > bin folder.

Step 2. Launch ResearchDownload.exe.

Step 3. Click on the Load Packet icon (top left corner).

Step 4. In the window that pops up, navigate to the location of the .pac file, select it then click Open.

Step 5. The PAC file should now be loaded (its name should appear at the top).

Step 6. Click the Settings Icon (top left corner).

Step 7. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

23 Downloads | Source: firmwarefile| Version:
21 Downloads | Source: firmwarefile| Version:
    Intex Aqua 4.0 3G Flash Files, Intex Aqua 4.0 3G Flash Tool, Intex Aqua 4.0 3G Official Stock Firmware, Intex Aqua 4.0 3G Stock ROM Download, Intex Aqua 4.0 3G Usb Driver
You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *

Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close