Inoi 3 Lite Firmware is now available for download if you brick you Inoi 3 Lite then you need this file to flash stock ROM INOI 3 Lite is powered by Android 7.0 Nougat, the new smartphone comes with 5.0 inches, 8GB memory with 1GB ram, the starting price is about 6209.31 Afghan Afghani.

All you have to do is simply download the below-given Inoi 3 Lite Firmware and tools on your PC and then follow the given instruction to install the Stock ROM on Inoi 3 using SP Flash Tool Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem. If in case you are going to flash the above firmware then you should know that flashing the stock firmware will permanently delete the personal data from the device.

Inoi 3 Lite Firmware Stock ROM Files [Nougat-Update]

We will use Sp Flash Tool to unbrick the Inoi 3 Lite. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Inoi 3 Lite.

Sp Flash Tool and it is used to Manually Upgrade or flash MTK Android Smartphone or tablet. Sp Flash Tool is used to flash only Stock Rom or Custom Firmware on Media Tek Devices which comes Inoi 3 Lite Firmware.zip Format. To use Smartphone Flashing tool with Inoi 3 Lite you first need to properly install the latest Vcom USB Drivers for Inoi 3 Lite.

Inoi 3 Lite Firmware Benefits:

• Flash Stock To Unbrick your Inoi 3 Lite
• Fix boot loop issue
• Update and Downgrade Inoi 3 Lite
• Unroot or Fix Bugs
• To solve the lag or stutter on Inoi 3 Lite
• Fix software issues.
• Return to stock for warranty coverage.

Inoi 3 Lite Firmware Details:

• Gapps File: Included
• Device Supported: Inoi 3 Lite
• Tool Supported: SP Flash Tool
• Processor: MediaTek –MT6580
• Os: Android 7.0 Nougat

Pre-requirements to Install Stock Firmware on Inoi 3 Lite:

• Supported Phone: Inoi 3 Lite
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• Backup your Call Log – Contacts – Sms – Etc With G Backup
• Backup your current Firmware With MTK Droid Tool
• Backup your backup IMEI NVRAM

Flashing Tool And Drivers:

• Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
• VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)

Disclaimer:

• Please Read and understand the Full Guide Before Flashing Inoi 3 Lite Firmware.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Inoi 3 Lite:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Inoi 3 Lite Firmware Flash File ROM for your phone from below.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Inoi 3 Lite Firmware Flashing With Sp Flash Tool.