Want to update software or simply Wish to clean install the Stock ROM on InFocus Turbo 5 Plus then you definitely are in the best place. InFocus Turbo 5 Plus is based on MTK CPU.
To install the Stock firmware on InFocus Turbo 5 Plus MediaTek powered device, you require Flashing Tool known as Sp Flash Tool, Formally also called SmartPhone Flashing Tool.
Download the InFocus Turbo 5 Plus Stock Firmware, drivers, and SP flash tool, then you can carry out our instructions on setting up the firmware on InFocus Turbo 5 Plus.
- 1 How to Flash Firmware on InFocus Turbo 5 Plus:
- 2 The Benefit Of InFocus Turbo 5 Plus Stock ROM:
- 3 InFocus Turbo 5 Flash File Details:
- 4 Pre-requirements to Install Stock Firmware on InFocus Turbo 5 Plus:
- 5 Take Phone Backup:
- 6 Flashing Tool And Drivers:
- 7 Disclaimer:
- 8 Instructions to Install Firmware on InFocus Turbo 5 Plus:
How to Flash Firmware on InFocus Turbo 5 Plus:
We will use Sp Flash Tool to unbrick the InFocus Turbo 5 Plus. This tool is really very efficient. Just follow the step by step procedure to use One-Click Unbrick Tool install stock ROM Files on your InFocus Turbo 5 Plus.
Sp Flash Tool and it is used to Manually Upgrade or Flash MTK Android Smartphone or tablet. Sp Flash Tool is used to flash only Stock Rom or Custom Firmware on MediaTek Devices which comes in .zip Format.
To use Smartphone Flashing tool with InFocus Turbo 5 Plus you first need to properly install the Latest Vcom USB Drivers for InFocus Turbo 5 Plus.
The Benefit Of InFocus Turbo 5 Plus Stock ROM:
You Can Use The Following Flash Files For Upgrade or Unbrick InFocus Turbo 5 Plus / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem.
This Method Is Also Useful For InFocus Turbo 5 dead after flash/software update /Not Power And Also After Flashing The InFocus Turbo 5 Plus Stock Firmware IMEI Null or Unknown Baseband Problems Can Be Solved.
InFocus Turbo 5 Flash File Details:
- Gapps File: Included
- Device Supported: InFocus Turbo 5 Plus
- Tool Supported: SP Flash Tool
- Processor: MediaTek –MT6750
|Download||InFocus_Turbo_5_Plus_India_MT6750_20170902.zip Google Drive|
Pre-requirements to Install Stock Firmware on InFocus Turbo 5 Plus:
- Supported Phone: InFocus Turbo 5 Plus
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
Take Phone Backup:
- Backup your Call Log – Contacts – Sms – Etc With G Backup
- Backup your current Firmware With MTK Droid Tool
- Backup your backup IMEI NVRAM
Flashing Tool And Drivers:
- Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
- VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Please read and understand the Full Guide Before Flashing InFocus Turbo 5 Plus Stock Rom.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Instructions to Install Firmware on InFocus Turbo 5 Plus:
Download InFocus Turbo 5 Plus stock ROM zip file is given above and extracts it in your computer.
2. Download InFocus Turbo 5 Plus USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.
3. Next, switch off your InFocus Turbo 5 Plus smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.
5. As soon as SP Flash tool is launched, click on on “Download” tab.
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.
8. Now click on on the “Download” button to start out the flashing process.
9. Next, join your InFocus Turbo 5 Plus Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.
As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed stock ROM firmware in your InFocus Turbo 5 Plus Android device.
Follow Detailed Instruction InFocus Turbo 5 Plus Firmware Flashing With Sp Flash Tool.