Infinix Hot S3 X573 Official Stock Firmware

Infinix Hot S3 smartphone was launched in February 2018. The phone comes with a 5.65-inch touchscreen display with a resolution of 720 pixels by 1440 pixels.

The Infinix Hot S3 is powered by 1.4GHz octa-core processor and it comes with 3GB of RAM. The phone packs 32GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Infinix Hot S3 packs a 13megapixel primary camera on the rear and a 20megapixel front shooter for selfies.

The Infinix Hot S3 runs Android 8.0 and is powered by a 4000mAh non removable battery. It measures 152.30 x 72.80 x 8.40 (height x width x thickness) and weighs 150.00 grams.

The Infinix Hot S3 is a dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Compass/ Magnetometer, Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.

Infinix Hot S3 X573 Official Stock Firmware

Infinix Hot S3 X573 Official Stock Firmware

Readme Once: Take a Backup: If you are going to flash the above Firmware on your Qualcomm device, then take a backup of important data such as Contacts, Call logsSMS, and other data as because your personal data will be deleted after flashing the stock firmware.

1- Backup your Call Log – Contacts – Sms – Etc With G Backup

The firmware shared on this page is officially released by the company and helps you to recover your Phone if you ever got bootloop, software error, update error, hanging, Unknown Baseband, IMEI Null and dead issue.

How To Flash Infinix Hot S3 X573 With Qfil Flash Tool:

Download    Qualcomm QPST.  –  Qualcomm Drivers.  –  Infinix Hot S3 X573 05012018 QFIL.zip

Step 1. After Drivers installation, Attach Phone to PC via USB cable.

Step 2. While connecting to PC, the phone should be switched off and press volume up & down as boot key.

If it Create Qualcomm  HSUSB QDLoader 9008 port in device manager, the driver has been successfully installed.

Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.

Step 3. Download the QPST tool & driver.

Step 4. Make sure your device is charged to at least 30%.

Step 5. Run QFIL tool.

Step 6. Now Browse under the Programmer path to Chose MBN File.

Step 7. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.

Step 8. Next Go To  Load XML, select rawprogram_unsparse_without_qcn.xml, and Select Patch0.xml

Load XML comes with two option:

  • rawprogram_unsparse_without_qcn.xml: On choosing this file, data will not be lost.
  • rawprogram_unsparse.xml: Will lose RF Calibration data, IMEI, and WiFi/Bluetooth Address.

Step 9. Turn off the Phone and Attach it to PC by pressing Vol up & down button.

Step 10. Click on Select Port and choose the port.

Step 11. Click on Download to start flashing.

Step 12. Disconnect device from USB cable once Finish Download appears.

That’s all!

Follow Detailed Instruction How To Flash Stock Rom QPST 2.7.422 With QFIL.

Author: asim ali

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2018 Aio Mobile Stuff
top
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close