Infinix Hot 5 X559C DA File
Format A Single Partition using Infinix Hot 5 X559C DA File. This is a step by step guide showing how to format a single partition of an Infinix Hot 5 X559C with SP flash tool.

Why would I want to format a single partition on my Infinix Hot 5 X559C?

There are different causes why one might want to format a single partition on an Infinix Hot 5 X559C. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.

All you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements:

  • Supported Phone: Infinix Hot 5 X559C.
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation.
  • Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.

Infinix Hot 5 X559C DA File Detail:

  • File Name: Infinix Hot 5 X559C.zip
  • Tool Supported: Sp Flash Tool
  • Size: 366.4KB
Downlaod DA Auth File

How To Use Infinix Hot 5 X559C Da Auth File To Remove or Bypass Frp Lock.

Download the Sp Flash Tool and USB Drivers on your PC. Follow the below Guide to install DA file sing your favorite tool.

+ How To Use DA File in SP Flash Tool:

1. The steps below explain how to format a single partition of a using the SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Lenovo A6600 Plus A6600A40

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Lenovo A6600 Plus A6600A40

4. In the windows that appear next, navigate to and select the Infinix Hot 5 X559C scatter file.

select the Lenovo A6600 Plus A6600A40 scatter file

5. You should now be taken back to the SP flash tool window, click on the Format tab.

Lenovo A6600 Plus A6600A40 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Lenovo A6600 Plus A6600A40 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Lenovo A6600 Plus A6600A40 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length

Lenovo A6600 Plus A6600A40 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up your phone.

+ How To Use DA File in NCK Pro Box:

Step 1: Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).

Step 2: Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.

Step 3: Navigate to the location of the DA file, highlight it then click Open.

Step 4: The DA file should be loaded successfully and the checkbox ticked automatically.

Step 5: You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).

+ How To Use DA File in Miracle Box:

Step 1: Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.

Step 2: Click on the “DA File” button.

Step 3: Navigate to the location of the DA file, highlight it then click Open.

Step 4: The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.

Step 5: You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).

Disclaimer:

  • Once the SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Infinix Hot 5 X559C to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Infinix Hot 5 X559C stock ROM to revive the phone.
  • Avoid using a random Infinix Hot 5 X559C scatter file (even though its for your chipset) in the sp flash tool.
  • Just because a scatter file is for your chipset doesn’t mean it contains the same partition info.
  • Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.