Impression ImPAD P104

When it comes to a guide like how to flash Impression ImPAD P104 firmware, your information with flashing tools is important.

Advertisement

However, installing the Impression ImPAD P104 Stock ROM can be difficult at times when you search for the internet to unbrick Impression ImPAD P104. On this page, you will find information to help you prepare for flashing the Impression ImPAD P104.

All you have to do is simply download the below-given Impression ImPAD P104 firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Impression ImPAD P104 using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

Download Firmware/Flash File For Impression ImPAD P104:

There are various reasons to flash (Firmware on Impression ImPAD P104).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader
[quads id=2]

Requirements:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

 Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Impression ImPAD P104 Flash Tool And Drivers:

A.  Download and install Impression ImPAD P104 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Impression ImPAD P104 Flash Tool because of this tool is very efficient and support all kind of MTK phones.

Instructions to Flash Impression ImPAD P104 Stock ROM:

1. First of all Download the ‘Impression ImPAD P104 flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launch, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM on your Impression ImPAD P104.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Impression ImPAD P104 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Impression ImPAD P104 Firmware:

Disadvantage

Gapps: Included No Root
Device Supported: Impression ImPAD P104 No Twrp And Nand Backup
Tool Supported: SP Flash Tool No Customization And Over cloaking
Soc: MediaTek MT8735 No ADB Ad Block
Os: Android 8.1 Pre-installed OEM apps
[quads id=2]
Get Link