If you have a Huawei Y600-U00 smartphone and you want Y600 u00 flash tool firmware. To fix the LCD problem device, then you definitely are in the best article/post.

We will guide you to install the official Huawei Y600-U00 Stock Firmware on the device. This step is simple and straightforward to follow. We have listed the Huawei Y600-U00 Flash File below. Download the Stock ROM file to repair your Huawei Y600-U00.

The Huawei Y600-U00 is Run on Android OS powered by MediaTek MT6572 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

Huawei Y600-U00 Firmware Flash File [Stock ROM]:

If your Huawei Y600-U00 device is corrupt or bricked. Download Huawei Y600-U00 firmware from here. (based on your device model number) and flash it on your smartphone or tablet. T

o get it back to a working condition again. In this post, we share Huawei Y600-U00 official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Huawei Y600-U00 and flash with any chines Mobiles flashing tool or box.

The Benefit Of Huawei Y600-U00 Stock Firmware:

• Flash Stock To Unbrick your Huawei Y600-U00
• Fix boot loop issue
• Update and Downgrade Huawei Y600-U00
• Unroot or Fix Bugs
• To solve the lag or stutter on Huawei Y600-U00
• Fix software issues.
• Return to stock for warranty coverage.

Huawei Y600-U00 Stock Firmware Details:

• Gapps File: Included
• Device Supported: Huawei Y600-U00
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6572
• Os: Android

Huawei Y600 U00 Flash Tool Firmware:

• Huawei_Y600-U00_MT6572.zip
• Y600-U00V100R001C00B040
• Y600-U00V100R001C534B007
• Y600-U00V100R001C00B039 (SD Update)

Pre-requirements to Install Firmware on Huawei Y600-U00:

• Supported Phone: Huawei Y600-U00
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• • Backup your Call Log – Contacts – Sms – Etc With G Backup
  • Backup your current Firmware With MTK Droid Tool
  • Backup your backup IMEI NVRAM

Huawei Y600-U00 Flashing Tool And Drivers:

• Huawei Y600-U00 Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Huawei Y600-U00 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

• Please read and understand the Full Guide Before Flashing Huawei Y600-U00 Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Huawei Y600-U00:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Huawei Y600-U00 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.