Huawei Y520-U22 Firmware

 

Advertisement

I am flashing official stock firmware on Huawei Y520-U22 using a scatter file With an Sp flash tool. This will fix the boot loop and LCD problem. Also, solve all custom software related issues.

Step by step guide showing how to flash Huawei Y520-U22 stock ROM File with Sp flash tool

Why would you want to flash Firmware on your Huawei Y520-U22?

There are various reasons to flash Firmware on Huawei Y520-U22. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.

The Benefit Of Huawei Y520-U22 Firmware:

  • Flash Stock ROM To Unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • if your phone boots straight into recovery
  • Phone boots straight into its bootloader

Huawei Y520-U22 Firmware Details:

  • Gapps File: Included
  • Device Supported: Huawei Y520-U22
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6582-MT6572
  • OS: Android

Download Huawei Y520-U22 Flash File:

Huawei_Y520-U22_MT6582.zip

Huawei_Y520-U22_MT6572_V100R001C567B108_South_East_Asia_South_Pacific_Region.zip

[quads id=2]

Requirements to flash Huawei Y520-U22 Stock ROM:

  • Supported Phone: Huawei Y520-U22 Stock ROM
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Huawei Y520-U22 Firmware Backup

Before going to install Huawei Y520-U22 stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Huawei Y520-U22 Flash Tool And Drivers:

A.  Download and install Huawei Y520-U22 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Huawei Y520-U22 Flash Tool procedure there are different reasons why we will use Sp Flash Tool to unbrick the Huawei Y520-U22.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Huawei Y520-U22.

Instructions to Flash Huawei Y520-U22 Stock ROM:

1. Download Huawei Y520-U22 flash file zip file is given above and extracts it on your computer.

2. Download Huawei Y520-U22 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Huawei Y520-U22 smartphone and take away the battery (it’s removable).

Switch Off Huawei Y520-U22

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Huawei Y520-U22 Firmware Flash

5. As soon as the SP Flash tool is launch, click on on “Download” tab.

How To Flash Huawei Y520-U22 Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Huawei Y520-U22 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference, see the picture given below.

Select Huawei Y520-U22 Firmware

8. Now click on on the “Download” button to start the flashing process.

Press Download For Huawei Y520-U22 Firmware

9. Next, join your Huawei Y520-U22 Android device to your computer using the USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Huawei Y520-U22 Firmware Download Complete

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Huawei Y520-U22 Android device.

Follow Detailed Instruction Huawei Y520-U22 Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Huawei Y520-U22.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Huawei Y520-U22 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

6 COMMENTS

Comments are closed.