Home Stock Firmware Huawei Huawei Y3II Secure Boot DA File

Huawei Y3II Secure Boot DA File [LUA U22, LUA U23]

Format A Single Partition In Huawei Y3II using Huawei Y3II Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei Y3II using SP flash tool.

Huawei Y3II Secure Boot DA File

Why would I want to format a single partition on my Huawei Y3II?

There are different causes why one might want to format a single partition on a Huawei Y3II. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my Huawei Y3II:

  • Supported Phone: Huawei Y3II
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Huawei Y3II Backup:

Download Huawei Y3II Flashing Tool And Drivers:

Huawei Y3II Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Huawei Y3II
  • Tool Supported: Sp Flash Tool

Download

Huawei-LUA-U22_LUA-U23 .7z

[quads id=2]

How to Format a Single Partition of Huawei Y3II:

1. The steps below explain how to format a single partition of a Huawei Y3II using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

4. In the windows that appear next, navigate to and select the Huawei Y3II scatter file.

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

6. Tick the checkbox beside “Manual format flash”

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:
Linear_start addr = Begin Address
partition_size    = Format Length
10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei Y3II.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei Y3II to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei Y3II stock ROM to revive the phone.
  • Avoid using a random Huawei Y3II scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.

Exit mobile version