Huawei Y3 2017 CRO L03 Secure Boot DA File

Format A Single Partition In Huawei Y3 2017 CRO L03 using Huawei Y3 2017 CRO L03 Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei Y3 2017 CRO L03 using SP flash tool.

CRO L03 Secure Boot DA File

Why would I want to format a single partition on my Huawei Y3 2017 CRO L03?

There are different causes why one might want to format a single partition on a Huawei Y3 2017 CRO L03. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my Huawei Y3 2017 CRO L03:

  • Supported Phone: Huawei Y3 2017 CRO L03
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Huawei Y3 2017 CRO L03 Backup:

Download Huawei Y3 2017 CRO L03 Flashing Tool And Drivers:

Huawei Y3 2017 CRO L03 Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Huawei Y3 2017 CRO L03
  • Tool Supported: Sp Flash Tool

Download

CRO_L03_Boot .zip

How to Format a Single Partition of Huawei Y3 2017 CRO L03:

1. The steps below explain how to format a single partition of a Huawei Y3 2017 CRO L03 using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Huawei Y3 2017 CRO L03

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Huawei Y3 2017 CRO L03

4. In the windows that appear next, navigate to and select the Huawei Y3 2017 CRO L03 scatter file.

select the Huawei Y3 2017 CRO L03 scatter file

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

Huawei Y3 2017 CRO L03 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Huawei Y3 2017 CRO L03 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Huawei Y3 2017 CRO L03 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:
Linear_start addr = Begin Address
partition_size    = Format Length
Huawei Y3 2017 CRO L03 addr and partition_size
10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei Y3 2017 CRO L03.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei Y3 2017 CRO L03 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei Y3 2017 CRO L03 stock ROM to revive the phone.
  • Avoid using a random Huawei Y3 2017 CRO L03 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.
You might also like

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More