Format A Single Partition In Huawei TIT-U02Y6 PRO using Huawei TIT-U02 Y6 PRO Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei TIT-U02Y6 PRO using SP flash tool.

Huawei TIT-U02Y6 PRO Secure Boot DA File

Advertisements
Table of Contents

Why would I want to format a single partition on my Huawei TIT-U02Y6 PRO?

There are different causes why one might want to format a single partition on a Huawei TIT-U02Y6 PRO. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my Huawei TIT-U02Y6 PRO:

  • Supported Phone: Huawei TIT-U02Y6 PRO
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Huawei TIT-U02Y6 PRO Backup:

Download Huawei TIT-U02Y6 PRO Flashing Tool And Drivers:

Huawei TIT-U02Y6 PRO Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Huawei TIT-U02Y6 PRO
  • Tool Supported: Sp Flash Tool

Download

DA_SWSEC.Huawei_MYA-L03 .7z

Advertisements

How to Format a Single Partition of Huawei TIT-U02Y6 PRO:

1. The steps below explain how to format a single partition of a Huawei TIT-U02Y6 PRO using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Huawei TIT-U02Y6 PRO

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Huawei TIT-U02Y6 PRO

4. In the windows that appear next, navigate to and select the Huawei TIT-U02Y6 PRO scatter file.

select the Huawei TIT-U02Y6 PRO scatter file

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

Huawei TIT-U02Y6 PRO Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Huawei TIT-U02Y6 PRO Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Huawei TIT-U02Y6 PRO format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length
Huawei TIT-U02Y6 PRO addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei TIT-U02Y6 PRO.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei TIT-U02Y6 PRO to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei TIT-U02Y6 PRO stock ROM to revive the phone.
  • Avoid using a random Huawei TIT-U02Y6 PRO scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.