Huawei TIT U02 ROW Secure Boot DA File [Format Single Partition]

Did your Huawei TIT U02 stuck on the FRP screen. Then you can easily bypass it with your recent Google account. and if you forgot the login password then flashing the tit u02 firmware did not help you.

Now you have to bypass the tit u02 FRP protection by flashing a small Huawei tit u02 da file with sp flash tool and format the partition which has the data of login.

Format A Single Partition In Huawei TIT U02 ROW using Huawei TIT U02 ROW Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei TIT U02 ROW using SP flash tool.

Why would I want to format a single partition on my Huawei TIT U02 ROW?

There are different causes why one might want to format a single partition on a Huawei TIT U02 ROW. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my Huawei TIT U02 ROW:

• Supported Phone: Huawei TIT U02 ROW
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Huawei TIT U02 ROW Backup:

• First Create a copy of your Call Log – Contacts – Sms – Etc With G Backup
• Second Make a duplicate of current Huawei TIT U02 ROW Firmware With MTK Droid Tool
• Third backup Huawei TIT U02 ROW IMEI NVRAM

Download Huawei TIT U02 ROW Flashing Tool And Drivers:

• Huawei TIT U02 ROW Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Huawei TIT U02 ROW VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Huawei TIT U02 ROW Secure Boot DA File Detail:

• File Name: DA_SWSEC.Huawei_MYA-L03 .7z
• Device Supported: Huawei TIT U02 ROW
• Tool Supported: Sp Flash Tool

Download

DA_SWSEC.Huawei_TIT_U02_ROW .7z

How to Format a Single Partition of Huawei TIT U02 ROW:

1. The steps below explain how to format a single partition of a Huawei TIT U02 ROW using the SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

4. In the windows that appear next, navigate to and select the Huawei TIT U02 ROW scatter file.

5. You should now be taken back to the SP flash tool window, click on the Format tab.

6. Tick the checkbox beside “Manual format flash”

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length

Advertisements

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei TIT U02 ROW.

Disclaimer:

• Once the SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei TIT U02 ROW to go dead.
• If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei TIT U02 ROW stock ROM to revive the phone.
• Avoid using a random Huawei TIT U02 ROW scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
• SP flash tool was created by MediaTek Inc. so credits to them for the tool.