Format A Single Partition In Huawei MYA-L22 using Huawei MYA-L22 Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei MYA-L22 using SP flash tool. This is a working file especially if you are getting the da_error securityboot_boot_not_accepted error.

Why would I want to format a single partition on my Huawei MYA L22?

There are different causes why one might want to format a single partition with Huawei mya l22 da file on a Huawei MYA-L22. One such example is when your device is FRP locked.

Advertisement

All you need do is to format only FRP partition with Huawei mya l22 da file OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions.

The method below will show how we can do this.

Huawei MYA-L22 Secure Boot DA File [Format Single Partition]

Requirements to format one single partition on my Huawei MYA-L22:

  • Supported Phone: Huawei MYA-L22
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.
  • Huawei mya l22 da file

Take Huawei MYA-L22 Backup:

Download Huawei MYA-L22 Flashing Tool And Drivers:

Huawei MYA-L22 Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Xiaomi Redmi Note 7 Pro
  • Tool Supported: Xiaomi MI Flash Tool

Download Huawei Mya L22 Da File

DA_SWSEC.Huawei_MYA L22 .7z

[quads id=2]

How to Format a Single Partition of Huawei MYA-L22:

1. The steps below explain how to format a single partition of a Huawei MYA-L22 using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Huawei MYA-L22

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Huawei MYA-L22

4. In the windows that appear next, navigate to and select the Huawei MYA-L22 scatter file.

select the Huawei MYA-L22 scatter file

5. You should now be taken back to the SP flash tool window, click on the Format tab.

Huawei MYA-L22 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Huawei MYA-L22 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

Huawei MYA-L22 Secure Boot DA File [Format Single Partition]

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Huawei MYA-L22 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length
Huawei MYA-L22 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

Huawei MYA-L22 Secure Boot DA File [Format Single Partition]

11. Now you can boot up the Huawei MYA-L22.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei MYA-L22 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei MYA-L22 stock ROM to revive the phone.
  • Avoid using a random Huawei MYA-L22 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.