Huawei G730 U10 Secure Boot DA File [Format Single Partition]

Format A Single Partition In Huawei G730 U10 using Huawei G730 U10 Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei G730 U10 using SP flash tool.

Why would I want to format a single partition on my Huawei G730 U10?

There are different causes why one might want to format a single partition on a Huawei G730 U10. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Read Also: How To Flash Huawei G730-U10 Firmware File [ROM]

Requirements to format one single partition on my Huawei G730 U10:

• Supported Phone: Huawei G730 U10
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Huawei G730 U10 Backup:

• First Create a copy of your Call Log – Contacts – Sms – Etc With G Backup
• Second Make a duplicate of current Huawei G730 U10 Firmware With MTK Droid Tool
• Third backup Huawei G730 U10 IMEI NVRAM

Download Huawei G730 U10 Flashing Tool And Drivers:

• Huawei G730 U10 Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Huawei G730 U10 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Huawei G730-U10 Da File File Detail:

• File Name: DA_SWSEC.Huawei_MYA-L03 .7z [g730-u10 da file]
• Device Supported: Huawei G730 U10
• Tool Supported: Sp Flash Tool

Download

Huawei G730-u10 DA file .zip

G730_U10_Boot  file.zip

HUAWEIG730-U10MTK_AllInOne_DA_SP file.rar

How to Format a Single Partition of Huawei G730 U10:

1. The steps below explain how to format a single partition of a Huawei G730 U10 using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

4. In the windows that appear next, navigate to and select the Huawei G730 U10 scatter file.

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

6. Tick the checkbox beside “Manual format flash”

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Advertisements

Linear_start addr = Begin Address
partition_size    = Format Length

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei G730 U10.

Advertisements

Disclaimer:

• Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei G730 U10 to go dead.
• If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei G730 U10 stock ROM to revive the phone.
• Avoid using a random Huawei G730 U10 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
• SP flash tool was created by MediaTek Inc. so credits to them for the tool.