How To Flash Walton Primo GM3 Stock Firmware File

Official Stock ROM Firmware for Walton Primo GM3, in the article you Will Learn How to Install Stock ROM – Flash File on Walton Primo GM3. if you own a Walton Primo GM3 smartphone and want to Install Stock Firmware– Flash File on it to unbrick or fix boot loop issue then you are on Correct Place, in The article, we Share a Step by Step Guide to Install Stock Firmware on Walton Primo GM3.

Table of Contents

How To Flash Walton Primo GM3 Stock Firmware File

We will use Sp Flash Tool to unbrick the Walton Primo GM3. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Walton Primo GM3.

Sp Flash Tool and it is used to Manually Upgrade or flash MTK Android Smartphone or tablet. Sp Flash Tool is used to flash only Stock Rom or Custom Firmware on Media Tek Devices which comes in .zip Format. To use Smartphone Flashing tool with Walton Primo GM3 you first need to properly install the latest Vcom USB Drivers for Walton Primo GM3.

The Benefit Walton Primo GM3 Of Stock ROM:

Flash Stock To Unbrick your Walton Primo GM3
Flash Stock ROM to solve the boot loop issue
Update and Downgrade Walton Primo GM3
Unroot or Fix Bugs on the phone
To solve the lag or stutter on Walton Primo GM3
By flashing Stock ROM, you can fix software issues.
Revert back to stock to get your warranty.

Firmware Details:

Gapps File: Included
Device Supported: Walton Primo GM3
Tool Supported: SP Flash Tool
Processor: MediaTek –MT6739

Download File	Description
Download	Walton Primo GM3 MT6739 V07 T18 20180424.zip

Pre-requirements to Install Stock Firmware on Walton Primo GM3:

Supported Phone: Walton Primo GM3
Charge your mobile: You may no less than a half charge.
Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

How To Flash Dexp GL355 Firmware File [ROM]

Feb 19, 2019

How To Flash Oukitel WP1 Firmware File [ROM]

Feb 16, 2019

Flashing Tool And Drivers:

Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)

Disclaimer:

Please Read and understand the Full Guide Before Flashing Walton Primo GM3 Stock Rom.
Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
Make sure that the USB drivers for your device are installed on the computer.
Your smartphone must have a 70–80% charge.
Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Walton Primo GM3:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK android USB drivers.

Step 3: Then download Stock Firmware Flash File ROM for your phone from below.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.