How To Flash Stock Rom Samsung Galaxy Fame S6810 and S6810P
Please Read and understand the Full Gudie before Performing Any Action.
Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
This tutorial is only for Samsung Galaxy Fame S6810 and S6810P.
- Please do not use it on any other options smartphone or tablet.
- Make sure that the drivers for your device are installed on the computer.
- Your smartphone must have a 70-80% charge.
- Make a backup copy of important data such as call logs, SMS and other data, it is to if something goes wrong, your data is not affected.
Pre Requirements To Flash Stock Rom Samsung Galaxy Fame S6810 and S6810P :-
- Download and install Samsung Drivers
- Download and unzip the file Odin307.zip
- Download and unzip the rom you want from the list below. password to unzip samfirmware.com
- Make sure you have a charged battery (75% minimum)
- Samsung Galaxy Fame S6810
Europe Android 4.1.2 – S6810XXAMB3 S6810XXAME1
- Samsung Galaxy Fame S6810P
- Europe: Android 4.1.2 –S6810PXXAME3
Steps To Flash Stock Rom Samsung Galaxy Fame S6810 and S6810P :-
- Turn off your mobile.
- press and hold the keys Volume Down + Power + Home . then start odin mode.
- Connect your phone to your computer
- Unzip and run odin.
- Select the files in odin as below :-
– PDA in Code
– CSC in CSC
– Modem in PHONE .
- In the case of a single .tar file, select the .tar file in PDA .
- Make sure only the check boxes Auto Reboot and F. Reset Time are checked.
- Click Start to begin the installation.
- Wait for the installation and do not touch anything. your phone will reboot.
- At the end of the installation, a green rectangle with PASS! appears.
- That is, the new rom is installed. To view the new configurations of your phone, go to Settings > About phone.