How To Flash Motorola Moto X XT1562 With RSD Lite Motorola Flash Tool

By | Friday, Jun 30 2017 11:36AM

How To Update/Unbrick Motorola Moto X XT1562 Android Marshmallow With RSD Lite Motorola Flash Tool

How To Flash Motorola Moto X XT1562 With RSD Lite motorola Flash Tool

  • Please Read and understand the Full Guide before Performing Any Action.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • This tutorial is only for Motorola Moto X XT1562. Please do not use it on any other options smartphone or tablet.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 7080% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

You Can Use The Following Flash Files For Upgrade Motorola Moto X XT1562 Android Marshmallow / And If You Want To Hard Reset It By Flashing The Stock Rom/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom IMEI Null or Unknown Baseband Problems Can Be Solve.

Steps:

  1. Download And Install Motorola USB Driver 
  2. Download and Install RSD Lite Motorola Flash Tool. And Stock Rom Files.
  3. Extract the firmware in the zip file to your computer, open the extracted folder.
    Afte
  4. Extract the firmware in the zip file to your computer, open the extracted folder.
  5. After extracting you will see an XML file “VZW” then open the file with notepad. Remove all lines with the word “getvar”, there were two lines that have the word “getvar”, then save.
  6. Open RSD Lite, press the “…” next to the filename. Find and select the XML file that has been edited in step No.2.Your phone must be on the AP FastBoot Mode.
    ⇒Turn off your phone.
    ⇒Press and hold the Vol Up + Vol Down + Power button together.
    ⇒You will enter into the Boot Mode Selection Menu, scroll down and select AP Fastboot.
  7. Connect your phone to your computer via USB,  will be recognized as
    Once the device is recognized, Press the start button.
  8. Flashing process will take about 15-20 minutes.
  9. If the flash is successful, your phone will reboot and revert to the stock firmware.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.