Micromax Canvas Spark 3 Q385 Firmware Flash File

The specific Micromax Canvas Spark 3 Q385 Firmware comes with a Stock ROM of Micromax Canvas Spark 3 Q385 With SPD Flash Tool. This helps you to bypass FRP lock and revert from the root and custom ROM.

Download Firmware/Flash File For Micromax Canvas Spark 3 Q385:

There are various reasons to flash (Firmware on Micromax Canvas Spark 3 Q385).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

Requirements:

Before going to install Micromax Canvas Spark 3 Q385 flash file you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

Instructions to Flash Micromax Canvas Spark 3 Q385 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the Micromax Canvas Spark 3 Q385 flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Micromax Canvas Spark 3 Q385 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Bin Packet load Error When Flashing “Micromax Canvas Spark 3 Q385 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Micromax Canvas Spark 3 Q385 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.