How To Flash Intex Cloud Q11 Stock Rom

How To Flash Intex Cloud Q11 Stock Rom

Intex has launched Intex Cloud Q11 budget affordable 5.5-inch HD display, Android 6.0 smartphone launched for Rs.4699, It has VR Enabled powered by 1.3 GHz quad-core MediaTek MT6580 processorwith 1GB RAM 8GB storage and runs on Android 6.0 Marshmallow. It has a 8-megapixel rear camera with dual LED flash and a 5-megapixel front-facing camera that also has an LED flash.

Please Read and understand the Full Guide Before Flashing Intex Cloud Q11 Stock Rom.

Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.

Make sure that the USB drivers for your device are installed on the computer.

Your smartphone must have a 70–80% charge.

Make a backup copy of important data such as call logsSMS, and other data, it is to if something goes wrong, your data is not affected.


You Can Use The Following Flash Files For Upgrade Intex Cloud Q11 / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom IMEI Null or Unknown Baseband Problems Can Be Solved.


How To Flash Intex Cloud Q11 :-

Download Intex Cloud Q11 Flash    MTK  android USB drivers.     SP Flash Tool.

  1. First, you need to download and extract SP flash tool and USB drivers.
  2. Download and install MTK  android USB drivers.
  3. Then download Firmware file/Flash file/Rom for your phone.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In download tab, click on scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug phone.
  12. Power on the phone and enjoy.
  13. After flashing process starts, it might take up to 510 minutes. So keep patience and wait.

Follow Detailed Instruction MTK Phones Flashing With Sp Flash Tool.

    Intex Cloud Q11 Flash Files Android 6.0, Intex Cloud Q11 Hard Reset, Intex Cloud Q11 Official Stock Firmware, Intex Cloud Q11 Stock Rom Download, Intex Cloud Q11 Unbrick Guide
Copyright © 2018 Aio Mobile Stuff
Please disabled adblocker to keep our website live.After Disabled Click Refresh button