How To Flash Innjoo F2 Tablet Firmware File [Stock ROM]

in this article, you will learn how you can flash Innjoo F2 Tablet Firmware file. So if you are in this article, then either your phone is working properly.

You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system.

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Innjoo F2 Tablet Stock ROM, USB drivers and flash tool that is in it.

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Innjoo F2 Tablet Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Innjoo F2 Tablet Firmware.

3. And in the last part, we will guide you How to flash this Innjoo F2 Tablet ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

The Advantages Of Innjoo F2 Tablet Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the Innjoo F2 Tablet stock ROM on Innjoo F2 Tablet through recovery or with SP Flash Tool.

If your Innjoo F2 Tablet device turns to a soft-brick, it may:

• Keeps Rebooting;
• Boots Straight Into Recovery;
• Boots Straight Into its Bootloader;
• Freeze at the startup screen or boot Animation;

Innjoo F2 Tablet Flash File Details:

Download Innjoo F2 Tablet Flash File:

Gapps File:	Included
Device Supported:	Innjoo F2 Tablet
Tool Supported:	SP Flash Tool
Processor:	MediaTek MT6582
Os:	Android
Download:	Innjoo_F2_20141206_V1_MT6582.zip

Pre-requirements to Flash Innjoo F2 Tablet Stock Firmware File:

• Supported Phone: Innjoo F2 Tablet
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

1. Take Innjoo F2 Tablet Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

---

2. Download Innjoo F2 Tablet Flash Tool And Drivers:

A.  Download and install Innjoo F2 Tablet Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Innjoo F2 Tablet Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Innjoo F2 Tablet.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Innjoo F2 Tablet.

Disclaimer:

• Please read and understand the Full Guide Before Flashing Innjoo F2 Tablet.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Before flashing, Stock ROM Innjoo F2 Tablet must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash Innjoo F2 Tablet Firmware File:

1. Download Innjoo F2 Tablet flash file zip file given above and extract it in your computer.

2. Download Innjoo F2 Tablet USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Innjoo F2 Tablet smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Innjoo F2 Tablet Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Innjoo F2 Tablet Android device.

Follow Detailed Instruction Innjoo F2 Tablet Firmware Flashing With Sp Flash Tool.