How To Flash DEXP G253 Firmware File [Stock ROM]

This time I will share a tutorial on how to flash DEXP G253 firmware file. With computers in an easy and tested way on our devices. In this article, you will find DEXP G253 Stock Firmware ROM.

Official download link flashing tutorial and flash tool. Download DEXP G253 stock ROM from here. Flash it in your device and enjoy the native Android experience again.

DEXP G253 Firmware

All the solution to your problems with your phone is currently available in this article. You just need some material like DEXP G253 Stock ROM, USB drivers and flash tool that is in it.

How To Flash DEXP G253 Firmware File [ROM]

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the DEXP G253 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the DEXP G253 Firmware.

3. And in the last part, we will guide you How to flash this DEXP G253 ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

The Advantages Of DEXP G253 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the DEXP G253 stock ROM on DEXP G253 through recovery or with SP Flash Tool.

If your DEXP G253 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

DEXP G253 Stock ROM Details:

Download DEXP G253 Flash File:

Gapps File:Included
Device Supported:DEXP G253
Tool Supported:SP Flash Tool
Processor:MediaTek MT6580
Os:Android 8.1
Download:G253_S1_20190422_MT6580_8.1.zip

Pre-requirements to Flash DEXP G253 Stock Firmware File:

  • Supported Phone: DEXP G253
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take DEXP G253 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download DEXP G253 Flash Tool And Drivers:

A. Download and install DEXP G253 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as DEXP G253 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the DEXP G253.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your DEXP G253.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing DEXP G253.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM DEXP G253 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash DEXP G253 Firmware File:

1. Download DEXP G253 flash file zip file given above and extract it in your computer.

2. Download DEXP G253 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your DEXP G253 smartphone and take away the battery (it’s removable).

Switch Off DEXP G253

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For DEXP G253 Firmware Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

How To Flash DEXP G253 Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

DEXP G253 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select DEXP G253 Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For DEXP G253 Firmware

9. Next, join your DEXP G253 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

DEXP G253 Firmware Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your DEXP G253 Android device.

Follow Detailed Instruction DEXP G253 Firmware Flashing With Sp Flash Tool.

Leave a Reply

Your email address will not be published. Required fields are marked *