How To Flash Dexp AS260 Firmware File [Stock ROM]

in this article, you will learn how you can install Dexp AS260 Firmware. So if you are in this article, then either your phone is working properly.

You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Dexp AS260 Stock ROM, USB drivers and flash tool that is in it.

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Dexp AS260 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Dexp AS260 Firmware.

3. And in the last part, we will guide you How to flash this Dexp AS260 ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

Dexp AS260 Firmware

The Advantages Of Dexp AS260 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Dexp AS260 is stuck in a boot loop, and as the name implies, is caused by a software error on Dexp AS260.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Dexp AS260 through recovery or with SP Flash Tool.

If your Dexp AS260 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Dexp AS260 Stock ROM Details:

Gapps File:Included
Device Supported:Dexp AS260
Tool Supported:SP Flash Tool
Processor:MediaTek MT6739WA
Os:Android 8.1 Oreo
Download:AS260_S1_181026.zip

Pre-requirements to Install Dexp AS260 Firmware:

  • Supported Phone: Dexp AS260
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Dexp AS260 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Dexp AS260 Flashing Tool And Drivers:

A. Download and install Dexp AS260 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Dexp AS260.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Dexp AS260.

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Dexp AS260 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Dexp AS260 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Dexp AS260 Firmware:

1. Download Dexp AS260 stock ROM zip file given above and extract it in your computer.

2. Download Dexp AS260 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Dexp AS260 smartphone and take away the battery (it’s removable).

Switch Off Melrose S9 Plus

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For Dexp AS260 Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

How To Flash Dexp AS260 File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Dexp AS260 Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Dexp AS260

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Dexp AS260

9. Next, join your Dexp AS260 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Dexp AS260 Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Dexp AS260 Android device.

Follow Detailed Instruction Dexp AS260 Firmware Flashing With Sp Flash Tool.

Leave a Reply

Your email address will not be published. Required fields are marked *