Coolpad Roar 5 E2C Firmware Flash File [Stock ROM Download]

Coolpad Roar 5 E2C Firmware

Welcome To all in one thread for Coolpad Roar 5 E2C in this post I will share all kinds of Coolpad Roar 5 E2C Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Coolpad Roar 5 E2C software upgrade.

How To Flash Coolpad Roar 5 E2C Stock ROM:

“Coolpad Roar 5 E2C Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Coolpad Roar 5 E2C Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Coolpad Roar 5 E2C Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements to Install Coolpad Roar 5 E2C Stock ROM:

  • Supported Phone: Coolpad Roar 5 E2C
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Coolpad Roar 5 E2C Full Backup

Before going to install Coolpad Roar 5 E2C stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Coolpad Roar 5 E2C Flash Tool And Drivers:
  • A.  Download and install Coolpad Roar 5 E2C Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool for as Coolpad Roar 5 E2C Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Coolpad Roar 5 E2C Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the Coolpad Roar 5 E2C ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.


  • Read and understand the Full Guide before flashing.”Coolpad Roar 5 E2C Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.

Coolpad Roar 5 E2C Firmware Details:


Gapps: Included No Root
Device Supported: Coolpad Roar 5 E2C No Twrp And Nand Backup
Tool Supported: QPST Tool – QFIL No Customization And Over cloaking
Soc: Qualcomm No ADB Ad Block
Os: Android 7 Nougat Pre-installed OEM apps

[quads id=2]

  prog_emmc_firehose_8909_ddr .zip .gz

You may also like...