How To

How to Fix the Blinking Red Light on Samsung TV Remotes

Sometimes, you encounter issues with your Samsung TV remote blinking red light, even though this is a known issue with Samsung TVs and remotes. Users on forums have reported the problem, so you are not alone.

Today, you will learn what’s the reason behind the issue and how you can fix it.

Fix the Blinking Red Light on Samsung TV Remotes

Red light blinking on Samsung TV remote: Possible causes

Various reasons can cause Samsung TV remotes to blink red lights. There are several common ones, including:

  • Remote’s is out of range.

    Advertisements
  • Weak or dead remote batteries.

  • Blocked IR sensor.

  • Rusty battery contacts.

  • Remote unpaired with TV.

Thus, the red light you see on the remote is caused by this. To fix the problem, let’s troubleshoot it.

Replace the Batteries

If the issue is a dead or weak remote battery, you should first replace it. The following steps will help you:

Step 1: Remove the battery panel from the back.

Step 2: Take out the remote control’s batteries.

Step 3: Try the remote again after replacing the batteries.

Replace the Batteries

The new batteries should solve the problem if the remote works ideally after inserting them. Continue with the following fix if you still can’t get the remote to work.

Check for pressed keys.

There is a high probability that one of the buttons on the remote is stuck, causing it not to work and blinking red. It’s essential to look for the stuck key, pop it up, and resolve the issue if it’s the case. You can get the remote to work again with the TV by pressing all the remote controls individually. The following is a summary of what needs to be done:

Check for pressed keys

Step 1: You must gently inspect and press the stuck key to remove it. The buttons can also be popped back out by pressing each key individually.

Step 2: Upon clicking on the button, there is a high probability that this point has resolved your issue.

Check for the Interference

Samsung remotes use an IR blaster to communicate with TVs, and the IR sensor must have a clear line of sight for it to work correctly. It will not be possible for the remote to communicate with the TV if anything blocks the IR sensor’s path.

As a consequence, make sure that no obstacles are blocking the IR sensor. Please remove them if you have any, and your issue should be resolved.

Reset the remote by power cycling.

It has also been reported that power cycling the Samsung remote helps many users solve the problem. The following steps will help you:

Reset the remote by power cycling

Step 1: Take the remote control’s batteries out.

Step 2: Hold down the power button for about 25-30 seconds, and you will drain the remote’s remaining battery.

Step 3: Insert the batteries back into the remote control.

Check whether the remote is functioning properly. Continue with the following fix if not.

Your TV’s remote needs to be paired again

In cases where the remote isn’t appropriately paired or gets unpaired, the red light on the remote might be blinking because the remote isn’t paired correctly. If the remote doesn’t work, you can try to repair it. The following steps will help you:

  • The first step is to turn on the TV.
  • The second step is to long press the Return and Play/Pause keys for approximately five seconds.
  • Once the pairing process is complete, please wait for it to complete.

Replace your remote control.

It may be necessary to replace the remote if the above methods fail to resolve the red light blinking issue. The problem is not fixed; somewhat, it is completely removed.

There are many options available today when it comes to remote controls. Purchasing Samsung’s dedicated parts website will allow you to get the original remote control for your TV.

Frequently Asked Questions

Q. Can I Reset My Samsung TV’s Remote?

You can reset your Samsung TV remote easily if you remove the batteries and then press the Power button for 10-15 seconds after removing the batteries. You must insert the batteries once you have reset the device.

Q. Why is My TV’s Remote Flashing Red?

You must change your batteries if your Samsung TV remote continuously flashes red while attempting to control your TV. If it continues to do so, then there is a high chance that either your remote has become unpaired from your TV or its batteries have died.

Q. How can I fix the Blinking Red Light on My Samsung TV?

It is the simplest way to fix the flashing red light on your Samsung TV that you need to restart. To restore the TV to its original state, you only have to unplug it, wait 60 seconds, and then plug it back in again. Nevertheless, if that doesn’t work, you might want to check out our dedicated article on how to fix the Samsung TV red light blinking problem that can guide you on handling it.

In conclusion, these are the effective troubleshooting methods that you can use to solve the problem of your Samsung TV remote not working and the red light on your TV blinking.

Thanks for taking the time to read this article. I hope you find it helpful. If you have any additional questions about the article, please share them in the comments section below. Don’t forget to share this information with your family and friends so that they can also benefit from it.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button