Download Official Stock Firmware Flash File For Hotwav Magic 5 Plus. If you have Hotwav Magic 5 Plus Smartphone. and You want to download the Stock ROM – Flash File For it. then You are in a right place, You have to do this by using the Below Tutorial.
This article contains the Hotwav Magic 5 Plus Firmware Flash File. That will allow you to recover your Hotwav Magic 5 Plus mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
How To Flash Hotwav Magic 5 Plus Firmware File:
We will use Sp Flash Tool to unbrick the Hotwav Magic 5 Plus as we use for Hotwav V10. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Hotwav Magic 5 Plus.
The Advantages Hotwav Magic 5 Plus Firmware:
- Flash Stock To Unbrick your Hotwav Magic 5 Plus
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade Hotwav Magic 5 Plus
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter on Hotwav Magic 5 Plus
- By flashing Stock ROM, you can fix software issues.
- Revert back to stock to get your warranty.
Hotwav Magic 5 Plus Firmware Details:
- Gapps File: Included
- Device Supported: Hotwav Magic 5 Plus
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6737M
- Os: Android 7.0 Nougat
Pre-requirements to Install Hotwav Magic 5 Plus Firmware:
- Supported Phone: Hotwav Magic 5 Plus
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
Take Phone Backup:
Hotwav Magic 5 Plus Flashing Tool And Drivers:
- Hotwav Magic 5 Plus Flash Tool: Download the latest SP Flash tool and extract it (Install)
- Hotwav Magic 5 Plus VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
- Please read and understand the Full Guide Before Flashing Hotwav Magic 5 Plus Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install Hotwav Magic 5 Plus Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download Hotwav Magic 5 Plus Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in the SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction Hotwav Magic 5 Plus Firmware Flashing With Sp Flash Tool.