Hisense F26 Firmware File [Stock ROM]

Hisense F26

Here are the most suitable ways of executing how to Flash Hisense F26 Firmware. If you are using a Hisense F26 this will be the best guide to install Hisense F26 Stock ROM.

By flashing the Hisense F26, almost all the data, components, and files present there will get wiped off, and installs a fresh OS version.

Stock Rom is an operating system which set as default in your Android phones. These are developed by the manufacturers to attracts their customers. Every device contains its own unique and attractive features in their Stock Rom.

Hisense F26 Stock ROM – How To Flash Guide

The Advantages Of Hisense F26 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Phone is stuck in a boot loop, and as the name implies, is caused by a software errorUsually the lack of a system to boot from or some other minor software bug that glitching boot.

If your Hisense F26 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Pre-requirements:

Instructions to Install Hisense F26 Firmware:

Download the QcomDloader Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the QcomDloader Tool.

  1. Download and extract the QcomDloader Tool on the computer.
  2. Download Stock Firmware.
  3. Install Hisense F26 USB Driver on the Computer.
  4. Connect your device to the computer using a USB cable.
  5. Once your device is connected to the computer, Open QcomDloader.exe.
  6. Click on the Load Button and locate the “Hisense F26 L1450.6.02.01.00 Firmware” on the computer.
  7. Click on the Settings Button and Select Download Mode as Upgrade.
  8. Now, Leave the eMMC Programmer, Raw program, Patch0 Box as it is. But, you may need to change it, if the name of a respected file is not the same as written in the Box.
  9. Click OK to exit the configuration interface.
  10. Click on Start Button to begin the Flashing process.
  11. Once, Flashing is completed you will be able to see the Green Passed Message.
  12. Disconnect the device from the Computer and Close the QcomDloader Tool.
  13. Congratulations! Now Restart your Mode device, and you will be able to use it.

Follow Detailed Guidelines How To Flash Stock ROM With QcomDloader Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Ensure charged you phone at 70–80%.

Hisense F26 Firmware Details:

Gapps: Included
Device Supported: 
Hisense F26
Tool Supported: 
QcomDloader Tool
Soc: 
QCOM SD 636
Os: 
Android
Password: Null
[quads id=2]
Download Firmware/Flash File