Home Stock Firmware Hisense Hisense F10 Secure Boot DA File

Hisense F10 Secure Boot DA File [Format Single Partition]

Hisense F10 Secure Boot DA File

Format A Single Partition using Hisense F10 DA File. This is a step by step guide showing how to format a single partition of a Hisense F10 with a Secure Boot Download Agent loader File.

Why would I want to format a single partition on my Hisense F10?

There are different causes why one might want to format a single partition on a Hisense F10. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.

All you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements:

Hisense F10 DA File Detail:

  • Device Supported: Hisense F10
  • SOC: Media-Tek
  • Size: 1.1 MB
  • Password: Null
[quads id=2]
Download Hisense F10 DA – Auth File

How To Use Hisense F10 DA And Auth Files:

The guide below explains how to format a single partition of a Hisense F10 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…

How to use Hisense F10 DA File in SP Flash Tool

Step 1:

  • Launch the flash_tool.exe.

Step 2:

  • Once the SP Flash is launched, click on the “Download tab.”

Step 3:

  • Click on the “choose” button in front of the Download-Agent.

Step 4:

  • Navigate to the location of the DA file, highlight it then click Open.

Step 5:

  • The DA file should be loaded successfully.

Step 6:

  • You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.

How to use Hisense F10 DA File in NCK Pro Box

Step 1:

  • Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).

Step 2:

  • Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.

Step 3:

  • Navigate to the location of the DA file, highlight it then click Open.

Step 4:

  • The DA file should be loaded successfully and the checkbox ticked automatically.

Step 5:

  • You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).

How to use Hisense F10 DA File in Miracle Box

Step 1:

  • Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.

Step 2:

  • Click on the “DA File” button.

Step 3:

  • Navigate to the location of the DA file, highlight it then click Open.

Step 4:

  • The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.

Step 5:

  • You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).

Disclaimer:

  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Some MTK Secure Boot DA files work only on specific tools.
  • You may rename the DA file to MTK_AllInOne_DA_SP.bin
  • The selection of DA files in Miracle Box is only available from v2.75 and above.

Exit mobile version