Haier G8P Lite Firmware Flash File [Stock ROM]

Haier G8P Lite Firmware Flash File Stock ROM

 

If you’re looking for the Haier G8P Lite Firmware you need to flash, it can sometimes be difficult to locate online. For Haier G8P Lite.

In this Article/Tutorial about Unbrick Haier G8P Lite. and download flash files tested and working files. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Haier G8P Lite Mediatek Based Devices.

 

Haier G8P Lite Flash File [Firmware Marshmallow ROM]:

This article contains the Haier G8P Lite Firmware Flash File. That will allow you to recover your Haier G8P Lite mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

We will use Sp Flash Tool to unbrick the Haier G8P Lite as we use for Haier G8 Plus. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Haier G8P Lite.

[quads id=2]

The Advantages Haier G8P Lite Firmware:

  • Flash Stock To Unbrick your Haier G8P Lite
  • Fix boot loop issue
  • Update and Downgrade Haier G8P Lite
  • Unroot or Fix Bugs
  • To solve the lag or stutter on Haier G8P Lite
  • Fix software issues.
  • Return to stock for warranty coverage.

Haier G8P Lite Firmware Details:

  • Gapps File: Included
  • Device Supported: Haier G8P Lite
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6739
  • Os: Android 8.1.0 Oreo

Download

[quads id=2]

Pre-requirements to Install Haier G8P Lite Firmware:

  • Supported Phone: Haier G8P Lite
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Haier G8P Lite Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Haier G8P Lite Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Haier G8P Lite Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Haier G8P Lite Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Haier G8P Lite Firmware Flashing With Sp Flash Tool.