HomeStock FirmwareHaier Aire Lite Firmware Flash File

Haier Aire Lite Firmware Flash File [Oreo ROM]



This time I will share a tutorial on how to flash Haier Aire Lite Firmware. With computers in an easy and tested way on our devices. In this article, you will find Haier Aire Lite Stock Firmware ROM. official download link flashing tutorial and flash tool.

Download Haier Aire Lite stock ROM from here. Flash it in your device and enjoy the native Android experience again.

Remember this guide is also very much needed in case of upgrade or downgrade the Haier Aire Lite Firmware on Haier Aire Lite. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Haier Aire Lite. Some cases, We have bricked our Haier Aire Lite, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime. Also if you think your Haier Aire Lite lag or has a problem, then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Haier Aire Lite.

Haier Aire Lite Firmware Flash File [Oreo ROM]:

We will use Sp Flash Tool to unbrick the Haier Aire Lite as we use for Zopo ZP580. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Haier Aire Lite.

[quads id=2]

The Advantages Haier Aire Lite Firmware:

  • Flash Stock To Unbrick your Haier Aire Lite
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Haier Aire Lite
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Haier Aire Lite
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Haier Aire Lite Firmware Details:

  • Gapps File: Included
  • Device Supported: Haier Aire Lite
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6739
  • Os: Android 8.0 Oreo


[quads id=2]

Pre-requirements to Install Haier Aire Lite Firmware:

  • Supported Phone: Haier Aire Lite
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Haier Aire Lite Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Haier Aire Lite Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Haier Aire Lite Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Haier Aire Lite Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Haier Aire Lite Firmware Flashing With Sp Flash Tool.

- Advertisment -

Most Popular

- Advertisment -