[Guide] How To Install Cwm Samsung Note korean Shv-e 160

Please Read and understand the Full Guide before Performing Any Action.
Warning:- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device resulting from the use of the information in this guide.

• This tutorial is only for Samsung Note Korean Shv-e 160.
• Please do not use it on any other options, smartphone or tablet.
• Make sure that the drivers for your device are installed on the computer.
• Your smartphone must have a 70-80% charge.
• Make a backup copy of important data such as call logs, SMS and other data; it is to if something goes wrong, your data is not affected.

Pre Requirements To Install Cwm Samsung Note Korean Shv-e 160:-

• Download SAMSUNG_USB_Driver_for_Mobile_Phones.
• Download Cwm For Your PhoneShv-e 160s Shv-e 160L Shv-e 160k
• Download Odin

Steps To Install Cwm Samsung Note Korean Shv-e 160 S/L/K

• 1. Turn Off Your Phone. Pull Out the Battery And Reinsert It.
• 2. Press And Hold [Volume -] + [Menu] +[Power] Button At The Same Time.
• 3 . When you see the Korean Language With Yellow Triangle, Then Press Volume Up To Confirm. Now You Are In Download Mode.
• 4. Connect your phone to pc with cable and wait for driver installation.
• 5. Unzip and run Odin. you will see that Odin will detect your phone. For example, see the screen below.

• 6. Click on PDA and select the cwm that we downloaded. Be sure that you select the correct file for your phone.
• 7. Then press start odin will flash cwm and restart your phone
• 8 . To enter into cwm, turn off your phone and press and hold volume + and volume – and power buttons. when the phone vibrates 1 time, just leave the power button and continue holding the volume key.

now your phone is ready, make unlimited cwm backups and restore. thanks