Home Stock Firmware HTC How To Install CWM Recovery 5.0.2.8 HTC Wildfire S

[Guide] How To Install CWM Recovery 5.0.2.8 HTC Wildfire S

Root HTC Wildfire S

Here Is The Guide To installing Clockworkmod recovery On Htc Wildfire S

Pre Requirements:-

Installation CWM Recovery 5.0.2.8 HTC Wildfire S:-

  1. Unzip fastboot.zip and paste the file into the root of your computer C:
  2. Paste the file recovery-5.0.2.8-marvel.img into the file Folder.
  3. If your mobile is connected to your computer, disconnect it. Please remove the battery from your phone and then reinsert it.
  4. Press Power + Volume Down for a few seconds until the bootloader menu. Wait until the HBOOT loads.
  5. Then select Fastboot by pressing Power.
  6. Connect your phone to your computer via the USB cable.
  7. On your computer, press the Windows + R. A window opens. Type cmd and press OK.
  8. A command window opens. Type the following code:
  9. cd c: fastboot
  10. then confirm by pressing Enter
  11. Then type the following code:
  12. fastboot flash recovery recovery-5.0.2.8-marvel.img
  13. then confirm by pressing Enter
  14. A vertical load will be displayed on your mobile—the wait time for the installation.
  15. At the end of the installation, select reboot bootloader by pressing the Volume Down button and pressing the Power.
  16. Then select BOOTLOADER by touching Power.
  17. Wait until the HBOOT charges, then select Recovery by pressing the Volume Down button and press the Power.
  18. Here, the Clockworkmod recovery 5.0.2.8 appears after a few moments.

Exit mobile version