Please Read and understand the Full Guide before Performing Any Action. Warning:- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
This tutorial is only for Samsung Galaxy Note 2.
Please do not use it on any other options smartphone or tablet.
Make sure that the drivers for your device are installed on the computer.
You need to enable USB debugging mode is disabled by default.
Your smartphone must have a 70-80% charge.
Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected [/note]
Model: GT-N7100
Country: Open Europe
Version: Android 4.3
Changelist: 1750609
Build date: Fri, 25 Sep 2013 18:06:49 +0000
Product Code: OXA
PDA: N7100XXUEMI6
CSC: N7100OXAEMI6
MODEM: N7100XXUEMI6
Requirements
Samsung Galaxy Note N7100 2
Have installed Kies Driver or the Galaxy Note 2 so that your PC correctly recognizes the Smartphone
Make sure you have installed Kies Driver or at least 2 of your notes so that it is correctly recognized by your PC
Now turn off your Notes 2
Put it in Download Mode (Press Volume Down + Home button at the same time + Power)
Dates confirmation with Continue (Volume Up)
Download, unzip and open ODIN
Connect the USB cable to the PC 2 notes
Wait ODIN recognizes Notes 2 (You will see the COM written in Yellow)
Put AP_N7100XXUEM16_CP_N7100XXEM16_CSC_N7100XAEM16_BY_WVAZ_DINK.tar of AP
Make sure re-partition is NOT flagged
Click the Start button and wait for the RESTART dell’Note 2
If you have problems with continuous reboots or crashes you have to turn off the power and start your Notes 2 in recovery mode and made all Wipe (this will erase all the data and apps on your smartphone ) and repeat the procedure from step 7.
Finished, you have upgraded to Android 4.3 the Galaxy Note 2