The specific Galaxy Z Flip SM-F700F U2 Firmware Download Package comes with a Stock ROM of Galaxy Z Flip SM-F700F U2 Security Patch Level 2020-10-01 (1 October 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
Galaxy Z Flip SM-F700F Binary 2 Android 10 Q Brazil ZTO – F700FXXU2BTJ3
There are various reasons to flash “Stock Firmware on Galaxy Z Flip SM-F700F U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy Z Flip SM-F700F U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Z Flip SM-F700F U2 Stock ROM Details:
| Model | SM-F700F Binary 2 U2, S2, Bit 2 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 10 Q |
| Operator | Clean ZTO (without logo, operator apps) |
| PDA | F700FXXU2BTJ3 |
| CSC | F700FOWO2BTJ2 |
| Product code | ZTO |
| Build Date | Tue, 20 Oct 2020 |
| Security Patch Level | 2020-10-01 (1 October 2020) |
| Size | 4.7 GB |
| Download | Google Drive | Android File Host |
Download Galaxy Z Flip SM-F700F U2 Boot.img
boot.img Galaxy Z Flip SM-F700F F700FXXU2BTJ3 to root on Magisk without TWRP
| Download | Google Drive |
How To Install Galaxy Z Flip SM-F700F U2 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy Z Flip SM-F700F U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy Z Flip SM-F700F U2 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Z Flip SM-F700F U2 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
- Phone must have a 70–80% charge.