If you own a Galaxy Xcover Pro SM-G715U1/DS U19 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy Xcover Pro SM-G715U1/DS U19 With 2023-10-01 (October 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy Xcover Pro SM-G715U1/DS Binary 19 Android 13 Brazil ZTO G715U1UESJEWI3
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy Xcover Pro SM-G715U1/DS U19“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Preparation:
- Supported Phone: Galaxy Xcover Pro SM-G715U1/DS U19
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy Xcover Pro SM-G715U1/DS U19 Stock Firmware:
Download Galaxy Xcover Pro SM-G715U1/DS U19 Latest Firmware:
SM-G715U1/DS U19 Brazil ZTO G715U1UESJEWI3:
| Model / Device | SM-G715U1 Binary 19 U19, S19, Bit 19 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android Version | Android 13T |
| Operator / Carrier | Clean ZTO (without logo, operator apps) |
| AP/PDA | G715U1UESJEWI3 |
| CSC | G715U1OWOJEWI3 |
| Modem CP Version / Baseband | G715U1UESJEWI3 |
| Product code | ZTO |
| Model References | SM-G715UZKDL05, SM-G715UZKSL05, SM-G715UZKTL05 |
| Build / Release Date | 2023-10-23 |
| Security Patch Level | 2023-10-01 (October 1, 2023) |
| Size | 4.2GB |
| Download | Google Drive |
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Xcover Pro SM-G715U1/DS U19 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
Advertisement
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Xcover Pro SM-G715U1/DS U19 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy Xcover Pro SM-G715U1/DS U19 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you should be able to update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features
