Stock Firmware

Galaxy Tab S9 (Wi-Fi) SM-X710 U1 Firmware – Android 13 T

Galaxy Tab S9 (Wi-Fi) SM-X710 U1 Firmware
If you own a Galaxy Tab S9 (Wi-Fi) SM-X710 U1 smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy Tab S9 (Wi-Fi) SM-X710 U1 With 2023-08-01 (August 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy Tab S9 (Wi-Fi) SM-X710 Binary 1 Android 13 Brazil ZTO X710XXU1AWHA

Benefits of Updating Firmware

Updating firmware can be daunting for many companies, but keeping up with the latest technology and ensuring that their systems are running smoothly is essential. Firmware updates provide benefits for businesses, from improved security to enhanced performance. By taking advantage of these advantages, firms can stay competitive in today’s marketplace and better serve their customers.

There are various reasons to flash “Stock Firmware on Galaxy Tab S9 (Wi-Fi) SM-X710 U1“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Preparation:

How To Install Galaxy Tab S9 (Wi-Fi) SM-X710 U1 Stock Firmware:

Download Galaxy Tab S9 (Wi-Fi) SM-X710 U1 Latest Firmware:

SM-X710 U1 Brazil ZTO X710XXU1AWHA:

Model SM-X710 Binary 1 U1, S1, Bit 1
Region / Country Brazil
Language Multi Language
Android Version Android 13 T
Operator / Carrier Clean ZTO (without logo, operator apps)
AP/PDA X710XXU1AWHA
CSC X710OXM1AWHA
Modem CP Version / Baseband X710XXU1AWHA
Product code ZTO
Model References SM-X710NZAHZTO, SM-X710NZADZTO
Build / Release Date 2023-10-18
Security Patch Level 2023-08-01 (August 1, 2023)
Size 8.6GB
Advertisements
Download Google Drive

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

Advertisements

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy Tab S9 (Wi-Fi) SM-X710 U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy Tab S9 (Wi-Fi) SM-X710 U1 finally boots up, you should be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and try the installation process again.
  2. Check if your device has enough battery life and if you have a stable internet connection.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device. This will erase all of your data, so be sure to back up your data before performing a factory reset.

Conclusion

Installing the latest firmware on your Galaxy Tab S9 (Wi-Fi) SM-X710 U1 can improve your device, including bug fixes and new features. If you follow the steps outlined in this guide, you can successfully update your device to the latest firmware version. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.

Must Read:

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button