The specific Galaxy Tab S8 Ultra SM-X900 U2 Firmware Download Package comes with a Stock ROM of Galaxy Tab S8 Ultra SM-X900 U2 latest Security Patch Level. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Tab S8 Ultra SM-X900 Binary 2 Firmware Android 12 S X900ZCU2AVF5
There are various reasons to flash “Stock Firmware on Galaxy Tab S8 Ultra SM-X900 U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-prerequisites:
- Supported Phone: Galaxy Tab S8 Ultra SM-X900 U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Tab S8 Ultra SM-X900 U2 Stock ROM Details:
Model | SM-X900 Binary 2 U2, S2, Bit 2 |
Region / Country | China |
Language | Multi-Language |
Android version | Android 12 s |
Operator / Carrier | Clean (no logo, carrier apps) |
AP / PDA | G525FXXS5BVF1 |
CSC | G525FOWO5BVE1 |
CP Version / Baseband Modem | – |
product code | CHN |
Build Date | 20220617104311 |
ADD DATE | 2022-06-25 15:47:28 |
Size | 6.25 GB Full Files |
Download | Google Drive | Mega |
Other Firmware For Galaxy Tab S8 Ultra:
How To Install Galaxy Tab S8 Ultra SM-X900 U2 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Tab S8 Ultra SM-X900 U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Tab S8 Ultra SM-X900 U2 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Tab S8 Ultra SM-X900 U2 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.