Galaxy Tab S6 Lite Wi-Fi SM-P613 Binary 2 Firmware – Android 13 T

If you own a Galaxy Tab S6 Lite Wi-Fi SM-P613 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy Tab S6 Lite Wi-Fi SM-P613 U2 With 2023-02-01 (February 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy Tab S6 Lite Wi-Fi SM-P613 Binary 2 Android 13 Brazil ZTO P613XXU2BWC2

Benefits of Updating Firmware

Updating firmware can be a daunting task for many companies, but it is essential to keep up with the latest technology and ensure that their systems are running smoothly. Firmware updates provide benefits for businesses, from improved security to enhanced performance. By taking advantage of these advantages, firms can stay competitive in today’s marketplace and better serve their customers.

There are various reasons to flash “Stock Firmware on Galaxy Tab S6 Lite Wi-Fi SM-P613 U2. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

• Flash Stock ROM to solve the boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs on the phone
• To solve the lag or stutter
• By flashing Stock ROM, you can fix software issues.
• Revert back to stock to get your warranty.

Preparation:

• Supported Phone: Galaxy Tab S6 Lite Wi-Fi SM-P613 U2
• Charge your mobile: You may no less than a half charge.
• Laptop or PC: To execute this installation, you must use a PC or Laptop.
• Backup Android Phone
• Download and install Samsung USB Driver
• Download Odin’s Latest version

How To Install Galaxy Tab S6 Lite Wi-Fi SM-P613 U2 Stock Firmware:

Download Galaxy Tab S6 Lite Wi-Fi SM-P613 U2 Latest Firmware:

SM-P613 U2 Brazil ZTO P613XXU2BWC2:

SM-P613 U2 Brazil ZTO P613XXU2BWB7:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy Tab S6 Lite Wi-Fi SM-P613 U2 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

When your Galaxy Tab S6 Lite Wi-Fi SM-P613 U2 finally boots up, you should run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”