Home Stock Firmware Galaxy Tab S4 SM-T835 U5 Firmware – Android 10 Q

Galaxy Tab S4 SM-T835 U5 Firmware – Android 10 Q

SM-T835 Binary 5 Firmware

The specific Galaxy Tab S4 SM-T835 U5 Firmware Download Package comes with a Stock ROM of Galaxy Tab S4 SM-T835 U5 Security Patch Level 2022-05-01 (May 1, 2022). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy Tab S4 SM-T835 Binary 5 Android 10 Q Brazil ZTO T835UBS5CVE1

There are various reasons to flash “Stock Firmware on Galaxy Tab S4 SM-T835 U5“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy Tab S4 SM-T835 U5 Stock ROM Details:

SM-T835 U5 Brazil ZTO T835UBS5CVE1:

Model SM-T835 Binary 5 U5, S5, Bit 5
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA T835UBS5CVE1
CSC T835OWO5CVE1
CP Version / Baseband Modem T835UBS5CVE1
product code ZTO
Build Date 2022-05-11
Security Patch Level 2022-05-01 (May 1, 2022)
Size 3.6 GB
Advertisements
Download Mega Google Drive
SM-T835 U5 Brazil ZTO T835UBU5CVA1:
Model SM-T835 Binary 5 U5, S5, Bit 5
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Clean ZTO (no logo, carrier apps)
PDA T835UBU5CVA1
CSC T835OWO5CVA1
MODEM CP Version T835UBU5CVA1
product code ZTO
Build Date 2022-01-04
Security Patch Level 2022-01-01 (January 1, 2022)
Size 3.7 GB
Download Google Drive Android File Host

How To Install Galaxy Tab S4 SM-T835 U5 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the  Galaxy Tab S4 SM-T835 U5 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

You should run your desired firmware when your Galaxy Tab S4 SM-T835 U5 finally boots up.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

Advertisements
  • Please read and understand the Full Guide before flashing “Galaxy Tab S4 SM-T835 U5 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Previous articleHow to enter Recovery Mode on Realme smartphones
Next articleGalaxy J6 SM-J600FN U10 Firmware – Android 10 Q
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!