Galaxy Tab S4 SM-T830 U5 Firmware – Android 10 Q

SM-T830 Binary 5 Firmware

The specific Galaxy Tab S4 SM-T830 U5 Firmware Download Package comes with a Stock ROM of Galaxy Tab S4 SM-T830 U5 Security Patch Level 2021-11-01 (November 2021). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy Tab S4 SM-T830 Binary 5 Firmware – Android 10 Q – XEF – France – T830XXU5CUL2

There are various reasons to flash “Stock Firmware on Galaxy Tab S4 SM-T830 U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy Tab S4 SM-T830 U5 Stock ROM Details:

SM-T830 U5 – XEF – France – T830XXU5CUL2

Model SM-T830 Binary 5 U5, S5, Bit 5
Region / Country France
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Clean (no logo, carrier apps)
AP / PDA A716VSQU5DUJ2
CSC P615CCHC3EVE6
CP Version / Baseband Modem A716VOYN5DUJ2
product code XEF
Build Date 20211022124715
Security Patch Level 2021-11-01 (November 2021)
Size 3.99 GB Full Files
[quads id=2]
Download Google Drive Mega

How To Install Galaxy Tab S4 SM-T830 U5 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy Tab S4 SM-T830 U5 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy Tab S4 SM-T830 U5 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab S4 SM-T830 U5 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

Leave a Reply

Your email address will not be published. Required fields are marked *