Galaxy Tab S2 SM-T817W U3 Firmware

The specific Galaxy Tab S2 SM-T817W U3 Firmware Download Package has a Stock ROM of Galaxy Tab S2 SM-T817W U3. This helps bypass FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy Tab S2 SM-T817W Binary 3 Firmware

There are various reasons to flash “Stock Firmware on Galaxy Tab S2 SM-T817W U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of  Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy Tab S2 SM-T817W U3 Stock ROM Details:

Gapps: Included
Device Supported: Galaxy Tab S2 SM-T817 Binary 3, U3, Bit 3
Tool Supported: Odin
OS Ver: Android 6.0.1, Android 7.0

[quads id=2]

T817WVLU 3 CQE4_T817WOYA3CQE4_XAC_7.0.zip AFH OneDrive GDrive2
T817WVLU 3 BPK5_T817WOYA3BPK5_XAC_6.0.1.zip AFH OneDrive GDrive2

How To Install Galaxy Tab S2 SM-T817W U3 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy Tab S2 SM-T817W U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy Tab S2 SM-T817W U3 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab S2 SM-T817W U3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
  • Phone must have a 70–80% charge.