Galaxy Tab S2 SM-T817P U2 Firmware [Full Repair]

Tab S2 SM-T817P Binary 2 Firmware

The specific Galaxy Tab S2 SM-T817P U2 Firmware Download Package has a Stock ROM of Galaxy Tab S2 SM-T817P U2. This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy Tab S2 SM-T817P Binary 2 Firmware

There are various reasons to flash “Stock Firmware on Galaxy Tab S2 SM-T817P U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy Tab S2 SM-T817P U2 Stock ROM Details:

Gapps: Included
Device Supported: Galaxy Tab S2 SM-T817 Binary 2, U2, Bit 2
Tool Supported: Odin
OS Ver: Android 5.1, Android 6.0, Android 7
[quads id=2]
T817PVPU 2 CQE7_T817PSPT2CQE7_SPR_7.0.zip AFH OneDrive GDrive2
T817PVPS 2 BPL1_T817PSPT2BPL1_SPR_6.0.1.zip AFH OneDrive GDrive2
T817PVPS 2 AOL1_T817PSPT2AOL1_SPR_5.1.1.zip AFH OneDrive GDrive2

How To Install Galaxy Tab S2 SM-T817P U2 Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy Tab S2 SM-T817P U2 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy Tab S2 SM-T817P U2 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab S2 SM-T817P U2 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.