Galaxy Tab S2 SM-T817P U2 Firmware [Full Repair]
The specific Galaxy Tab S2 SM-T817P U2 Firmware Download Package has a Stock ROM of Galaxy Tab S2 SM-T817P U2. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Tab S2 SM-T817P Binary 2 Firmware
There are various reasons to flash “Stock Firmware on Galaxy Tab S2 SM-T817P U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy Tab S2 SM-T817P U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Tab S2 SM-T817P U2 Stock ROM Details:
| Gapps: | Included |
| Device Supported: | Galaxy Tab S2 SM-T817 Binary 2, U2, Bit 2 |
| Tool Supported: | Odin |
| OS Ver: | Android 5.1, Android 6.0, Android 7 |
| T817PVPU 2 CQE7_T817PSPT2CQE7_SPR_7.0.zip | AFH | OneDrive | GDrive2 |
| T817PVPS 2 BPL1_T817PSPT2BPL1_SPR_6.0.1.zip | AFH | OneDrive | GDrive2 |
| T817PVPS 2 AOL1_T817PSPT2AOL1_SPR_5.1.1.zip | AFH | OneDrive | GDrive2 |
How To Install Galaxy Tab S2 SM-T817P U2 Stock Firmware:
How To Flash Samsung Stock Firmware With ODIN
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy Tab S2 SM-T817P U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you have to press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy Tab S2 SM-T817P U2 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Tab S2 SM-T817P U2 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.
