Galaxy Tab Active 2 SM-T395 Binary 12 Firmware

The specific Galaxy Tab Active 2 SM-T395 U12 Firmware Download Package comes with a Stock ROM of Galaxy Tab Active 2 SM-T395 U12 Security Patch Level 2021-05-01 (May 1, 2021). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy Tab Active 2 SM-T395 Binary 12 Android 9 Pie Brazil ZTO T395UBSCCUE1

There are various reasons to flash “Stock Firmware on Galaxy Tab Active 2 SM-T395 U12“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your Phone and canaccess the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the Phone
  • To solve the lag or stutter
  • Fix software issues.

Pre-requirements:

Galaxy Tab Active 2 SM-T395 U12 Stock ROM Details:

SM-T395 U12 Brazil ZTO T395UBSCCUE1:

Model SM-T395 Binary 12 U12, S12, Bit 12
Region / Country Brazil
Language Multi-Language
Android version Android 9 Pie
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA T395UBSCUE1
CSC T395ZTOCCUD1
CP Version / Baseband Modem T395XXUCCUD5
product code ZTO
Build Date 2021-05-29
Security Patch Level 2021-05-01 (May 1, 2021)
Size 2.4 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy Tab Active 2 SM-T395 U12 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy Tab Active 2 SM-T395 U12 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the Phone, yomustto boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click on the PDA buttn, and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed yocanto see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy Tab Active 2 SM-T395 U12 finally boots up, you shoulw be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab Active 2 SM-T395 U12 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resultig from using infusingn this guide.
  • Phone must have a 70–80% charge.