The specific Galaxy Tab Active 2 SM-T395 U10 Firmware Download Package comes with a Stock ROM of Galaxy Tab Active 2 SM-T395 U10 Security Patch Level 2020-12-01 (December 1, 2020). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy Tab Active 2 SM-T395 Binary 10 Android 9 Pie Brazil ZTO – T395UBSACTL1
There are various reasons to flash “Stock Firmware on Galaxy Tab Active 2 SM-T395 U10“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy Tab Active 2 SM-T395 U10 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy Tab Active 2 SM-T395 U10 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Tab Active 2 SM-T395 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy Tab Active 2 SM-T395 U10 Firmware“.
Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.