|

Galaxy Tab A8 Wi-Fi SM-X200 U2 Firmware – Android 13 T

Galaxy Tab A8 Wi-Fi SM-X200 Binary 2 Firmware

If you own a Galaxy Tab A8 Wi-Fi SM-X200 U2 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy Tab A8 Wi-Fi SM-X200 U2 With 2023-03-01 (March 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy Tab A8 Wi-Fi SM-X200 Binary 2 Android 13 Brazil ZTO X200XXU2CWC1

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy Tab A8 Wi-Fi SM-X200 U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

How To Install Galaxy Tab A8 Wi-Fi SM-X200 U2 Stock Firmware:

Download Galaxy Tab A8 Wi-Fi SM-X200 U2 Latest Firmware:

SM-X200 U2 Brazil ZTO X200XXU2CWC1:

Model SM-X200 Binary 2 U2, S2, Bit 2
Region / Country Brazil
Language Multi-Language
Android version Android 13 T
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA X200XXU2CWC1
CSC X200OWO2CWC1
Modem CP Version / Baseband X200XXU2CWC1
product code ZTO
Model Reference SM-X200NZAUZTO
Build Date 2023-03-15
Security Patch Level 2023-03-01 (March 1, 2023)
Size 3.9 GB
[quads id=2]
Download Mega    Google Drive

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy Tab A8 Wi-Fi SM-X200 U2 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy Tab A8 Wi-Fi SM-X200 U2 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.

Conclusion

Installing the latest firmware on your Galaxy Tab A8 Wi-Fi SM-X200 U2 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.

Must Read:

Leave a Reply

Your email address will not be published. Required fields are marked *