Samsung is simultaneously updating its Galaxy Tab A7 SM-T500 Firmware to Android 11 R Security Patch Level 2022-01-01 (January 1, 2022). Of course, the devices receive many new features; in addition to all the new features having better performance, the applications stay in RAM and run faster, and the performance is also improved since the background apps have more limits and only work when really needed.
Advertisement
Samsung Galaxy Tab A7 Wi-Fi SM-T500 Android 11 R Binary 3 Brazil ZTO T500XXU3BVF1
There are various reasons to flash “Stock Firmware on Galaxy Tab A7 SM-T500 U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
How To Install Galaxy Tab A7 SM-T500 U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Tab A7 SM-T500 U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Tab A7 SM-T500 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy Tab A7 SM-T500 U3 Firmware“.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.